Point-of-Use Tankless Electric Water Heater DHC-E

Point-of-Use Tankless Electric Water Heater DHC-E 8/10 1.4/1.8 GPM 7.2/9.6 kW

Electric Point of Use Tankless Water Heaters Heaters with advanced microprocessors controls.  DHC-E 8/10 1.4/1.8 GPM 7.2/9.6 kW

  • SKU # : DHC-E8/10
  • List Price : $350.00

  • Your Price : $185.00

    add your email to make an offer!

    Enter image letters!!!

Point-of-Use Tankless Electric Water Heater DHC-E

Stiebel Eltron developed tankless electric water heating technology almost 90 years ago and continues as the industry pioneer and world leader. Our engineering and manufacturing tradition of excellence means you can depend on the performance and reliability of our products. Instead of storing hot water, DHC-E models are tankless, heating water instantaneously and endlessly as it flows through the unit. They are 99% efficient, and, unlike tank-type water heaters, have no stand-by energy losses. The DHC-E is considerably smaller than a tank, saving space and allowing flexibility to determine the best location for installation. No venting is necessary, and the sleek European design even allows for installation with the unit visible. DHC-E 8/10 models are ideal for residential and commercial point-of-use sink applications including: bathrooms, cabins and cottages, office buildings, stores, malls, warehouses, restaurants, and gas stations. DHC-E 8/10 models are electronically controlled and can be set to deliver water at the temperature you need. The number of sinks a DHC-E can deliver hot water to depends on the temperature of the incoming cold water, the water flow through the unit, whether supply voltage is 208 or 240, and which power output the unit is set to.

Professional installation required:
  • DHC-E 8/10 tankless electric water heaters provide hot water for multiple low- or medium-flow sinks
  • DHC-E 8/10 models are set to 7.2 kW or 9.6 kW at installation via a jumper
  • DHC-E 8/10 models require 208 or 240 volt electric service, 1 dedicated 40 amp breaker at the 7.2 kW setting or 50 amp breaker at the 9.6 kW setting, and 8 gauge copper wiring
  • DHC-E 8/10 units installed at 9.6 kW will give these flow rates: 1.87 gpm @ 35 degrees F, 1.46 gpm @ 45 deg. F, 0.85 gpm @ 77 deg. F; and 1.41 gpm @ 35 deg. F, 1.09 gpm @ 45 deg. F, 0.64 gpm @ 77 deg. F if installed at 7.2 kW
  • DHC-E water heaters can be set on the front panel to supply water at the exact temperature desired from hand-washing temps of 86 degrees to as high as 140 degrees F if required by health codes
  • DHC-E models can be set to limit output water temperature to 109 degrees F
  • Installation should be as close to draw off points as possible to make the wait for hot water as short as possible and maximize energy savings
  • DHC-E tankless electric water heaters do not need pressure relief valves, drains, or circulating pumps
  • DHC-E tankless water heaters are ETL Listed for compliance with CSA and UL safety standards in the US and Canada
  • DHC-E tankless electric water heaters are exempt from seismic code, water fittings are 1/2 in. NPT and should be installed pointing down and connected to detachable plumbing (such as braided steel flex connectors or isolation valves) to allow for easy servicing
  • Overheat safety protection and thermal protection reset are standard
  • See warranty for complete details of the 3-year residential and commercial warranty against defects in workmanship and materials under normal use


Amperage (amps)  40 A  Assembled Depth (in.)  4.125 in 
Assembled Height (in.)  14.1875 in  Assembled Width (in.)  7.875 in 
Certifications and Listings  4-UL Certified,CSA Listed,ETL Listed  ENERGY STAR Certified  No 
Electric Product Type  Point of Use  Finish  High-impact polycarbonate plastic 
Finish Family  White  Flow Rate @ 35 F Rise (gallons/min)  1.87 gal (US)/min 
Flow Rate @ 45 F Rise (gallons/min)  1.46 gal (US)/min  Flow Rate @ 77 F Rise (gallons/min)  0.85 gal (US)/min 
Fuel Type  Electric  Indoor/Outdoor  Indoor 
Labor Warranty  No Warranty  Maximum temperature (F)  140 
Minimum Activation Rate (gpm)  0.37  Minimum Temperature (F)  86 °F 
Minimum operating temperature (F)  36  Part Warranty  3 Year 
Point-Of-Use  Yes  Product Depth (in.)  4.125 
Product Height (in.)  14.1875  Product Weight (lb.)  5.9 
Product Width (in.)  7.875  Residential/Commercial/industrial Use  Residential or commercial 
Returnable  90-Day  Voltage (volts)  208/240 V 
Wall Mountable  Yes  Water Connection Location  Bottom 
Water Connection Size (in.)  1/2” NPT  Wattage (watts)  9600 W